* * * * *

macOS Sierra 10.12.6 update is out!

fantomas1, Jul 19 2017 05:08 PM in Apple News

The macOS Sierra 10.12.6 update improves the security, stability and compatibility of your Mac, and is recommended for all users.
Enterprise content:
  • Resolves an issue that prevents making certain SMB connections from the Finder.
  • Fixes an issue that causes Xsan clients to unexpectedly restart when moving a file within a relation point on a Quantum StorNext File System.
  • Improves the stability of Terminal app.
Update

Combo

Installed

Attached File  Снимок экрана 2017-07-20 в 7.29.46.png   89.27KB   39 downloads

All workarounds as before. It works!

Tranquille comme d'habitude ;-)

Capture d’écran 2017-07-20 à 00.54.34.png

Just finished a Clean install of 10.12.6 with clover r4114 and all is good :)


Attached Files

@cyberdevs  upgraded to 10.12.6 smoothly on my laptop. ^_^ 

@cyberdevs  upgraded to 10.12.6 smoothly on my laptop. ^_^ 

Nice! :)

Updated automatically (19.07) - earned USB2.0 Ports.

:) 

Hello people good night. The Sierra 10.12.6 has support for the intel 7th generation, but I use fakecpuid, need to strip it to later update or after the installation can take it, or does it make no difference?

Sorry my bad English !!!

Hello people good night. The Sierra 10.12.6 has support for the intel 7th generation, but I use fakecpuid, need to strip it to later update or after the installation can take it, or does it make no difference?

Sorry my bad English !!!

 

You can remove the FakeCPUID before or after you installed the macOS 10.12.6 update it won't matter because if you SkyLake and KabyLake are both supported in the 10.12.6.

 

All you have to do is to boot into macOS with the FakeCPUID start the updater and in the meanwhile edit your config.plist and remove the FakeCPUID and once the installer is done then reboot. You can also install the update and reboot and once you're in the macOS 10.12.6 remove the FakeCPUID.

Everything perfect here  :yes:


Attached Files

Please help: How can I find out why the combo installer exits with an error? 

Please help: How can I find out why the combo installer exits with an error?

Check and see if the installer file is not corrupted.

 

here is the md5 hash for 10.12.6 combo update: MD5 macosupdcombo10.12.6.dmg = a23d2d3876cb91e714c5b796984d6a6a

 

open terminal and type: md5 and then drag the installer to terminal and then press Enter/Return compare your md5 hash with the one I posted.
Sent from my iPhone using Tapatalk

Same here:

 

MD5 (/Volumes/OSX/Users/user/Downloads/macosupdcombo10.12.6.dmg) = a23d2d3876cb91e714c5b796984d6a6a

 

 

Edit:

 

I also have this error in console:

 

 

Installer: NSURLConnection finished with error - code -1100

Well OK, will wait until 10.13 final then. Maybe some bad cleanup tool removed installation data...

Same here:

 

 

Edit:

 

I also have this error in console:

Is your internet connection ok? because NSURLConnection error is usually related the network connection.

You can remove the FakeCPUID before or after you installed the macOS 10.12.6 update it won't matter because if you SkyLake and KabyLake are both supported in the 10.12.6.

 

All you have to do is to boot into macOS with the FakeCPUID start the updater and in the meanwhile edit your config.plist and remove the FakeCPUID and once the installer is done then reboot. You can also install the update and reboot and once you're in the macOS 10.12.6 remove the FakeCPUID.

thanks for your help my friend, I will update and post here the result

 

Once again, thank you !!!

 

thanks for your help my friend, I will update and post here the result

 

Once again, thank you !!!

 

You're welcome :)

I hope it goes without any hiccups ;)

Yes my Internet connection works just normal. Also I think you can run the installer offline, too.

Yes my Internet connection works just normal. Also I think you can run the installer offline, too.


Yes the combo installer doesn't need the network connection but the error is indicating that there is a problem in the network connection. That's why I think the package might be damaged during the download process.


Sent from my iPhone using Tapatalk

No, the md5 checksum is correct. 

@Techposts, your post has been moved to: Help for Intel 620 - macOS Sierra 10.12.6

If I download the full Sierra installer and create an install medium from it, will it be now install 10.12.6, so does Apple always update that installer?

If I download the full Sierra installer and create an install medium from it, will it be now install 10.12.6, so does Apple always update that installer?

Yes it will be the latest update in the App Store.

 

You need to remove all the previous macOS Sierra installers though.

I personally compress them and then remove the install macOS.app so the new installer will be downloaded to Applications folder instead of updating the previous installers.

Hi friends, good night. So, I did the update but when I rebooted the TV was changing color and blinking, the audio and internet kexts did not load, had to format the hack. What do you think happened? Thank you for the help and sorry my bad English!!!!

 

 Asus H170M-PLUS/BR / Core i5 3.0 Ghz 7º Generetion / 4 Gb DDR 4 / ATI RADEON 6850

FakeCPUID for 7º generetion

Hi friends, good night. So, I did the update but when I rebooted the TV was changing color and blinking, the audio and internet kexts did not load, had to format the hack. What do you think happened? Thank you for the help and sorry my bad English!!!!

 

 Asus H170M-PLUS/BR / Core i5 3.0 Ghz 7º Generetion / 4 Gb DDR 4 / ATI RADEON 6850

FakeCPUID for 7º generetion

To fix the Flickering Color :You can use ResXtreme to change the color depth to fix the flickering, or you can use the SwitchResX to set the colors to millions.

 

And with 10.12.6 you don't need to use the FakeCPUID anymore KabyLake is supported now.

To fix the Flickering Color :You can use ResXtreme to change the color depth to fix the flickering, or you can use the SwitchResX to set the colors to millions.

 

And with 10.12.6 you don't need to use the FakeCPUID anymore KabyLake is supported now.

Hello my friend, how are you? So, why the LAN and Sound kext didn't load?? I don´t delete the fakecpuid, have a problem? thanks for your help!!!

Add Comment
© 2016 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy